English
Deutsch
Nederlands
Parts & pieces
couplings, valves, solenoids, splitters, tubing, air horn supports, membranes-, or diaphragms, shields-, or snow caps etcetera.
About the couplings: Fortunately Napoleon did not conquer the whole world. Unfortunately enough... that left the world with a wide variety of ways to measure stuff and a mind-boggling number of threadings.
To indicate the measurement; we have marked each product with either: (US) for US measurement standards, or (EU), for the metric system.
Oh and don't worry; if it's not listed below, just ask.
Loading...
5x Hadley fitting set for 1/4" (inch) air hose. Fits Hadley fittings with male thread 7/16-24". Set includes brass insert sleeve, clamp ring and bolt.
Hadley T-piece. Fitting set for splitting a 1/4" (inch) air hose. Set includes: 1x brass T-piece, 3x insert sleeves, 3x clamping rings, 3x hose clamp nuts
Air filter for pneumatic systems. A valve can become clogged by debris from the air tank or compressor, which may cause it to block or seize. Connecting this filter to the valve inlet can prevent this
Straight reducer from 1/8 BSPT to 3/8 BSPT. Straight reducer with BSP tapered external thread on both sides.
Straight adapter (male) from 1/4 BSPT to 1/8 BSP. Adapter (male) 1/4 BSPT to (female) 1/8 BSP.
Straight reducer from 1/8 BSPT to 1/4 BSPT. Straight reducer with BSP tapered external thread on both sides.
T-piece for 3x Ø6mm tube. Plastic PTC fitting for quick push-in and release.
Two-pole toggle switch with on-off function. Suitable for 12 V DC and 25 amperes.
Sticker with Hadley logo, specially for Hadley Truck Horns H00977ECE and H00978ECE
FIAMM JPT Jumper Connector. This jumper allows two AM80SX horns (high and low) to be connected simultaneously.
Hadley check valve, or non-return valve. Specifically designed for Hadley air sets. Angled valve with a 7/16" male thread for the air reservoir and a 1/4" hose clamp fitting for the compressor supply.
Hose barb with an outer diameter of Ø9 mm. Used to connect hoses with an inner diameter of Ø9 mm. Features 3/8 BSPT male thread on the other side.
Straight screw-on coupling PTC for 10 millimeter tube to 3/8 BSPP female
Hose clamp for hoses with an outer diameter between 10 and 16 mm.
Hose clamp for hoses with an outer diameter between 8 and 12 mm.
T-piece for 3x Ø12mm tube. Plastic PTC fitting for quick push-in and release.
Plug-in coupling with PTC connection for 8 mm tube. This coupling can be plugged into another 12mm PTC connection with the 12mm pin.