Tue, 01 Jul 2025 14:31:42 +0000 <![CDATA[Populairste aanbiedingen van Eurohorns]]> <![CDATA[Extended 7/16 angle coupling for 1/4inch tube]]> For Hadley air horns with 7/16 thread connection.

Extended angle coupling for 1/4 inch tube.
With compression fitting for 1/4 inch hose and 7/16-24 UNF male thread.

The male thread is straight.
The housing of the coupling is brass.

So you can screw the coupling into a 7/16-24 UNF input and connect a 1/4 inch hose to it.
This coupling can be used by fastening the hose using the sleeve, O-ring and tighten the nut. The hose can be removed by unscrewing the nut again.

Abbreviations:

UNF: Unified National Fine. Fine wire mainly used in the US
1/4 inch hose: Inch size hose comes (6.35mm)]]> Sun, 28 Apr 2024 10:53:17 +0000 <![CDATA[Hadley Lanyard Valve (US)]]> Lanyard Valve US-Thread H00755NS The only classic way to make noise with your Hadley air horns. Just pull to
open the airflow. This lanyard valve that can be screwed directley into Hadley
horns with a 7/16"-24 threaded inlet.
The air inlet on this valve is fitted for 1/4" (US) size air tube. The tighten fitting
is included.
 

Classic Hadley Lanyard Valve product information

Material ABS, metal  
Inlet tubing Ø1/4"  
Thread 7/16"-24UNF  
Hadley code H00755NS  


Delivery includes

- Hadley lanyard valve

Please note:
Always check the marking, next to the air inlet, on the Hadley horn; it
should say "7/16". Horns marked with "M12" are not compatible with this valve.


 ]]> Tue, 01 Jul 2025 14:31:42 +0000 <![CDATA[24v Italian Bus Horn classic line]]> Italian Bus Horn 24v  

Fiamm Italian bus horn set. This type of air horn is often used by buses
in Italy as a warning signal for oncoming traffic. For instance on narrow
mountain roads. This type of air horn set is sometimes also used as an
alternative for the regular Tour Horn.

A wiring schedule (several options) is included.
It is not plug and play, but with a little technical knowledge you'll be fine.
(please note: wiring is not included). If you are born with two left hands,
you can always ask your garage to help you.

Always make sure you are aware of your local legislation and make sure
you install it safely.
 

Product information ALA-kit 24V

please find the pdf-brochure in "Attachments"
Set content 2x horns, 1x compressor
Material ABS, aluminium, steel
Length (trumpets) 33cm &14,7cm
Diameter trumpets (Ø) 8,2cm
Measurements compressor 15,6cm x 7,7cm; Ø6,9cm
Sound pressure (2m) 116dB
Frequencies 390Hz & 490Hz
Voltage 24V
Ampere 17A
Fiamm code 921997
Registrations 10 ECE


Delivery includes

- Fiamm ALA-Set:
  2x red horns
  1x M4 crompressor
- 1x tubing
- 1x splitter
- 1x relais

Please note:
Always make sure you are aware of your local legislation and make sure
you install it safely.]]> Wed, 09 Nov 2022 13:59:47 +0000 <![CDATA[PTC Splitter 3/8 BSP to 2x 10mm]]> T-stuk naar 2x 10mm slang

T-stuk om direct in te draaien naar bijvoorbeeld twee luchthoorns.
Dit T-stuk kan direct in de uitgaang van ons "groot ventiel" gedraaid worden.

Levering:
1x T stuk 3/8 naar 2x10mm PTC


 
Product informatie        
Materiaal kunststof
Draad ingang 3/8 BSP (Gas)
uitgang (slang) 2x 10mm
Max. druk 10bar
   
]]> Wed, 15 May 2024 08:39:29 +0000 <![CDATA[12v Marine Horn high tone ]]>
12v Electromagnetic marine horn. Electric ship's horn where no compressor, air source and/or valve is required.
This set is a the version with a lower tone.

A common model on pleasure yachts. Made in Italy.
 
Basic Technical Info
Voltage 12Vdc
Ampere A
Decibels at 2m  dB
Frequency Low tone:  Hz
High tone:  Hz
Weight  gr.
Type approval  

 ]]> Wed, 09 Aug 2023 14:34:13 +0000 <![CDATA[Quick Connector 1/8 BSP Female to 1/8 BSP Female]]> This quick connector makes it possible to disconnect a component (air horn) from the air source without loss of pressure.

The female thread on both sides is 1/8 BSP .
The coupling housing is nickel-plated brass.

You can screw a 1/8 BSP coupling on both sides of the quick coupling.

This shortcut can be used easily.
Screw a 1/8 BSPP coupling on both sides of the quick connector and connect your pneumatic parts.
The quick coupling makes it possible to disconnect a component (air horn) from the air source without loss of pressure.

Abbreviations:

BSP: British Standard Pipe, also called Gas Wire.
BSPP: British Standard Pipe Parallel, also called Gas Wire. (Parallel = straight)

More information about hose sizes and threads can be found here: About Thread]]> Fri, 04 Nov 2022 16:06:49 +0000